Retaining Clamps
Retaining clamps called in the sector “ P clips ” are manufactured according to DIN 3016 standards. These rubber lined clamps can be used for fixing hydraulic pipes, hoses and cables especially in application areas of hose clamps and pipe clamps.
There is a reinforced band over the fixing hole and it prevents the clamp from tearing on heavy duty applications. EPDM, CR, NBR and MVQ rubber lining alternatives and without rubber types of P clips are also available.
Material alternatives for DIN 3016 retaining clamps are listed below.
| Material Mark |
Material Description |
International Material Nr. |
| W1 |
Hot dipped galvanized steel |
1.0529 |
| W3 |
AISI 430 stainless steel |
1.4016 |
| W4 |
AISI 304 stainless steel |
1.4301 |
| W5 |
AISI 316 stainless steel |
1.4401 |
b=Bant
(mm) |
Ødn=Hole
Diameter(mm) |
CLAMP TYPE |
| A |
B |
C |
D |
E |
F |
| Ød (mm) |
| 9 |
4,30 / -0 +0,18 |
5 - 40 |
6 - 40 |
6 - 40 |
5 - 40 |
5 - 40 |
6 - 40 |
| 12 |
5,30 / -0 +0,18 |
5 - 80 |
6 - 80 |
10 - 80 |
5 - 80 |
5 - 80 |
10 - 80 |
| 15 |
6,40 / -0 +0,22 |
5 - 100 |
6 - 100 |
10 - 100 |
5 - 100 |
5 - 100 |
10 - 100 |
| 20 |
8,40 / -0 +0,22 |
10 - 130 |
10 - 130 |
15 - 130 |
10 - 130 |
10 - 130 |
15 - 130 |
| 25 |
10,50 / -0 +0,27 |
15 - 150 |
15 - 150 |
20 - 150 |
15 - 150 |
15 - 150 |
20 - 150 |
Dın 3016 kelepçeler
